LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Disc Brakes) >> Removal & Installation >> Power Brake Booster Check Valve And/Or Hose >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel injector sight shield. Disconnect the vacuum hose and the brake booster vacuum check valve from vacuum brake booster. Disconnect the vacuum hose from the intake manifold vacuum port. Remove the brake booster vacuum check valve from the brake booster vacuum hose.
  2. Install the brake booster vacuum check valve to the brake booster vacuum hose. Connect the vacuum hose to the intake manifold vacuum port. Connect the vacuum hose and vacuum brake booster check valve to vacuum brake booster. Install the fuel injector sight shield.
scientia non olet · About LEMON Manuals