Park Brake Hardware - Drum: Removal
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle.
- Remove the tire and wheel assembly.
- Remove the rear brake drum.
- Using denatured alcohol, clean the rear brake shoes and hardware.
- Using non-lubricated, filtered compressed air, dry the rear brake shoes and hardware.
- Remove the rear brake shoes and hardware.
- Remove the park brake hardware.