LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 484 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Park Brake Actuator - Disc >> Removal

Park Brake Actuator - Disc: Removal

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release the park brake.
  2. Raise and support the vehicle.
  3. Remove the tire and wheel assembly.
  4. Relieve the tension from the park brake cables by loosening the nut at the equalizer.
  5. Remove the rear park brake cable from the park brake actuator lever.
  6. Remove the park brake cable from the mounting bracket by depressing the locking tabs.
  7. Remove the rotor. See BRAKE ROTOR - REAR .
  8. Remove the axle shaft. See appropriate AXLE SHAFT article in DRIVELINE/AXLES.
  9. Remove the park brake shoe. See PARK BRAKE SHOE - DISC .
  10. Remove the backing plate bolts.
  11. Remove the park brake actuator lever housing from the backing plate.
scientia non olet · About LEMON Manuals