LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 484 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Brake Hose >> Removal (Rear)

Removal (Rear)

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Support the vehicle with safety stands.
  3. Clean the dirt and foreign material from the brake hose and brake pipe fitting.
  4. Using a backup wrench, disconnect the brake hose and brake pipe fitting.
  5. Install a rubber cap or plug on the brake pipe fitting in order to prevent brake fluid loss and contamination.
  6. Remove the brake hose retainer.
  7. Remove the brake pipe from the brake junction block.
  8. Remove the brake junction block mounting bolt.
  9. Remove the brake hose.
scientia non olet · About LEMON Manuals