Secondary Camshaft Drive Chain Shoe Installation - Left
WARNING: This page is about a different car, the 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure that the left secondary camshaft drive chain shoe (2) is being installed.
- Position the left secondary camshaft drive chain shoe.
- Install the secondary camshaft drive chain shoe bolt.
Tighten: Tighten the secondary camshaft drive chain shoe bolt to 23 N.m (17 lb ft).
NOTE:
Refer to Fastener Notice
in Cautions and Notices.