LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1169 (Engine Mechanical (Repair Instructions 2 Of 5) - 3.6L (Ly7)) >> Repair Instructions (On-Vehicle Part 2 & Off-Vehicle Part 1) >> Off-Vehicle Repair Instructions - Part 1 >> Camshaft Position (CMP) Actuator Removal - Left Intake

Camshaft Position (CMP) Actuator Removal - Left Intake

WARNING: This page is about a different car, the 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Camshaft Position (CMP) Actuator
    GM946219Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Torque Reaction Against Timing Drive Chain Notice in Cautions and Notices.
  1. Use an open wrench on the hex cast into the camshaft in order to prevent engine rotation when loosening the camshaft position actuator bolt.
  2. Remove the left intake camshaft position actuator bolt.
  3. Remove the left intake camshaft position actuator.
scientia non olet · About LEMON Manuals