Test 15: Driver Information Center Switch Inoperative - English/Metric
- Turn ignition on. Place Driver Information Center (DIC) in temperature display mode. Press and release US/MET button twice. If display toggles between US and METRIC. No problem is indicated at this time. If display does not toggle between US and METRIC, go to next step.
- Replace compass/temperature display module. See COMPASS/TEMPERATURE DISPLAY MODULE under REMOVAL & INSTALLATION. After repairs, go to next step.
- Connect all disconnected components. Check system for proper operation. If system operates properly, test is complete. If system does not operate properly, go to step 1 .