Ring Gear & Pinion: Remove & Replace
WARNING: This page is about the Corvette 2D Convertible, Automatic, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Automatic Trans | 12.0 | A | ||
| Combination Procedure: DIFFERENTIAL CASE: Overhaul: | ||||
| Locking Axle | 0.9 | 0.7 | A | |
| Non-Locking Axle | 0.5 | 0.3 | A | |
| Combination Procedure: DIFFERENTIAL SIDE BEARING: Remove & Replace: | ||||
| 0.5 | 0.3 | A | ||