LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1998 >> Venture V6-3.4L VIN E >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Repair Instructions >> Right Drive Shaft Oil Seal Assemble

Right Drive Shaft Oil Seal Assemble

^ Tools Required
- J 29130 Axle Seal Installer
- J 8092 Handle

IMPORTANT: Inspect the seal assembly (4). Be sure that the seal was not damaged during assembly. Check that the garter spring was not dislodged.





Use J 29130 and J 8092 in order to install the oil seal assembly (4) on the front wheel drive shaft.


scientia non olet · About LEMON Manuals