LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1998 >> Venture V6-3.4L VIN E >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Repair Instructions >> Drive Sprocket and Turbine Shaft Disassemble

Drive Sprocket and Turbine Shaft Disassemble

IMPORTANT: Do not damage the grooves under the oil seal rings.





1. Cut the oil seal rings (513, 519) from the turbine shaft.


2. Remove the oil seal rings.





3. Remove the drive sprocket snap ring (515).
4. Remove the drive sprocket (516) from the turbine shaft (518).

scientia non olet · About LEMON Manuals