LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1998 >> Venture V6-3.4L VIN E >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Actuators and Solenoids - A/T >> Shift Solenoid >> Service and Repair >> Torque Converter Clutch Pulse Width Modulation Solenoid

Torque Converter Clutch Pulse Width Modulation Solenoid

REMOVAL PROCEDURE





1. Remove the case side cover.
2. Disconnect the transaxle wiring harness.
3. Remove the oil pump.
4. Remove the torque converter clutch PWM solenoid (325).

INSTALLATION PROCEDURE





1. Install the torque converter clutch PWM solenoid (325).
2. Connect the transaxle wiring harness.
3. Install the oil pump.
4. Install the case side cover.

scientia non olet · About LEMON Manuals