Steering Gear: Specifications

Bolt At Rack And Pinion 48 Nm (35 ft. lbs.)
Cylinder End Fittings 27.0 Nm (20 ft. lbs.)
Hex Lock Nut (32) 30.0 Nm (22 ft. lbs.)
Hex Torque Prevailing Nut:
Outer Tie Rod (1) 25.0 Nm (18 ft. lbs.) plus 180°
Inner Tie Rod (12) 100.0 Nm (74 ft. lbs.)
Jam Nut (7) 68.0 Nm (50 ft. lbs.)
Lock Nut (15) 68.0 Nm (50 ft. lbs.)
Pinion Preload 1.8 Nm (16 inch lbs.)
Rack And Pinion Mounting Bolts 80 Nm (59 ft. lbs.)
Steering Gear Bolt 80 Nm (59 ft. lbs.)
Steering Gear Heat Shield Bolt 6 Nm (54 inch lbs.)
Valve End Fittings 16.9 Nm (12.6 ft. lbs.)