C Pillar

Tools Required
J 29843-9

Description:

1. Unsnap the cover from the upper seat belt (1) anchor.
2. Use the J 29843-9 in order to remove the upper seat belt anchor bolt (2).

IMPORTANT: The lower seat belt anchor (4) attaches to the mini-buckle on the right side of the 60 percent seat cushion on vehicles equipped with a 60/40 split bench seat. Use a key or a small flat bladed tool in order to release the seat belt anchor from the mini-buckle.

3. Lift the trim cover in order to expose the lower seat belt anchor bolt (5).
4. Use the J 29843-9 in order to remove the bolt (5) securing the lower seat belt anchor (4) from the C-pillar.
5. Unsnap the cup holder/armrest trim cover (3) from the passenger's side.
6. Remove the front quarter trim from the driver's side. Refer to Front Quarter Trim in Rear Quarters.

Description:

7. Use the J 29843-9 in order to remove the bolt securing the seat belt retractor from the C-pillar.
8. Remove the seat side belt retractor from the C-pillar.