LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1998 >> Venture V6-3.4L VIN E >> Repair and Diagnosis >> Lighting and Horns >> Turn Signals >> Turn Signal Flasher >> Service and Repair

Turn Signal Flasher: Service and Repair




REMOVAL PROCEDURE
1. Use a small, flat-bladed tool in order to remove the flasher/shock sensor from the extension bracket.
2. Disconnect the electrical connector.

INSTALLATION PROCEDURE
1. Connect the electrical connector.
2. Install the flasher/shock sensor to the extension bracket.
scientia non olet · About LEMON Manuals