LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1998 >> Venture V6-3.4L VIN E >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Drive Belt Tensioner >> Service and Repair

Drive Belt Tensioner: Service and Repair

REMOVAL PROCEDURE





1. Remove the drive belt.
2. Remove the drive belt tensioner bolt.
3. Remove the drive belt tensioner.

INSTALLATION PROCEDURE





1. Install the drive belt tensioner.
2. Install the drive belt tensioner bolt.
^ Tighten the drive belt tensioner bolt to 50 N.m (37 ft. lb.).

3. Install the drive belt.

scientia non olet · About LEMON Manuals