Stopping PSD Open Operation

One of the following six actions will stop the PSD open operation:
- The sliding door reaches the fully open position.
- The open operation continues for longer than 20 seconds.
- The open operation was started by a closing reversal operation and the sliding door movement is blocked while opening.
- A PSD open/close switch (overhead console or B-pillar) or keyless entry transmitter button is pressed before the sliding has opened at least 30 cm (12 in).
- The travel is blocked before the sliding door has opened at least 30 cm (12 in).
- The overhead console PSD lockout switch is pressed (enabled position).