General Description

The Power Sliding Door (PSD) is designed in order to open and close the right sliding door by the following components:
- One of two buttons located in the vehicle
- The keyless entry transmitter

The PSD has a power assist that activates when the sliding is operated manually.

A PSD on/off switch enables or disables the PSD. The PSD on/off switch is located in the overhead console. Two PSD open/close switches activate the PSD operation:
- The overhead console switch
- The right B-pillar switch

The keyless entry transmitter also has a PSD open/close button.

Power Assist

Important:
- The Power Sliding Door (PSD) only operates with the sliding door unlocked.
- When the child security lock is engaged, the following conditions exist:
- The PSD will operate.
- The sliding door will not open when pulling the inside door handle.

When pulling either door handle with the sliding door fully closed, the Power Sliding Door (PSD) activates a power assist. The power assist assumes control of the sliding door operation.

The power assist feature assumes control and fully opens or fully closes the door under the following conditions:
- The sliding door is open.
- The sliding door is manually moved move than 7.5 cm (3 in) in either direction.