LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1998 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Front Brake Rotor >> Removal & Installation (AWD Astro & Safari, Silhouette, Trans Sport, Venture & All "1" & "2" Series 4WD Vehicles)

Removal & Installation (AWD Astro & Safari, Silhouette, Trans Sport, Venture & All "1" & "2" Series 4WD Vehicles)

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 1999 Pontiac Montana, 1999 Oldsmobile Silhouette, 1999 Oldsmobile Bravada, 1999 GMC Yukon, and 1999 GMC Suburban. However, it is still accessible from the selected car via links, so may be relevant.

Remove brake caliper (DO NOT disconnect brake hose). See FRONT BRAKE CALIPER . Remove rotor. To install, reverse removal procedure.

NOTE: On C/K 4WD models, rotor is bolted from back side. See Fig 1.
Fig 1: Identifying Front Rotor & Hub 4WD C/K Models
G00390335Courtesy of GENERAL MOTORS CORP.