Tachometer Gauge Inoperative Or Inaccurate
- If vehicle has been checked for Diagnostic Trouble Codes (DTCs), go to next step. If vehicle has not been checked for DTCs, go to TESTS W/CODES article in ENGINE PERFORMANCE section.
- Check for open, excessive resistance, electromagnetic interference or short (to ground or battery) in circuit No. 121 (White wire) between instrument cluster Black 18-pin connector C2, terminal "H", underhood accessory wiring junction block and Powertrain Control Module (PCM) Clear 80-pin connector C2, terminal No. 8. Repair as necessary and recheck system operation. If circuit is okay, go to next step.
- Replace instrument cluster. See INSTRUMENT CLUSTER under REMOVAL & INSTALLATION. Recheck system operation.