Fuel Gauge Resistance Test
- Remove instrument cluster. See INSTRUMENT CLUSTER under REMOVAL & INSTALLATION. Disconnect instrument cluster harness connectors. Go to next step.
- Using an ohmmeter, check fuel gauge resistance across appropriate terminals. See FUEL GAUGE RESISTANCE SPECIFICATIONS table. See Fig 1 . If resistance is not as specified, replace fuel gauge. If resistance is as specified, fuel gauge is operating properly at this time.
FUEL GAUGE RESISTANCE SPECIFICATIONS
| Application & Terminals | Ohms | |
|---|---|---|
| With Tachometer | ||
| "A" & "B" | 108 | |
| "A" & "C" | 233 | |
| "B" & "C" | 125 | |
| Without Tachometer | ||
| "A" & "B" | 106 | |
| "A" & "C" | 256 | |
| "B" & "C" | 150 | |