Diagnostic Aids
WARNING: This page is about a different variant/trim than selected.
Check following items:
- For missing or damaged "O" rings at EVAP canister fuel vapor and purge line fittings. Check for kinked, pinched or plugged vent hose.
- For faulty connections at PCM. Inspect harness connectors for backed-out terminals, improper mating, broken locks, improperly formed or damaged terminals, and poor terminal to wire connection.
- For damaged harness. Inspect wiring harness to EVAP vent solenoid, EVAP purge solenoid, and fuel tank pressure sensor for intermittent open or short.