SEO VF Digital Speedometer Does Not Display In Km/H (With English/Metric Fuse In Place)
- Remove fuse No. 25 (5-amp) from fuse block. Turn ignition switch to RUN position. Connect a 5-amp fused jumper wire between fuse block terminal G6 (Light Blue wire) and ground. If speedometer displays KM/H, go to next step. If speedometer does not display KM/H, go to step 3).
- Repair poor connection or open in circuit No. 1550 (Black wire) between fuse block and ground. Recheck system operation.
- Check for poor connection or open in circuit No. 811 (Light Blue wire) between fuse block and digital speedometer module. Repair as necessary and recheck system operation. If circuit is okay, go to next step.
- Replace instrument cluster. See INSTRUMENT CLUSTER under REMOVAL & INSTALLATION. Recheck system operation.