LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1998 >> Corvette 2D Convertible, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Testing - Diagnostic >> DTC U1166: Loss Of Communication With SCM >> Diagnostic Aids

Diagnostic Aids

  1. The following conditions may cause an intermittent: Intermittent open or short in serial data line, intermittent loss of communication with SCM, or damaged or loose star connector terminals.
  2. If serial data line is shorted to ground or voltage, all systems connected to same serial data line will not be capable of communicating properly. Systems capable of storing loss of communication DTCs will store these codes in their memory. After DTC U1166 is repaired, clear all DTCs from each system capable of storing this DTC.
  3. If DTC U1166 is set in IPC memory, use a scan tool to monitor communications with SCM. If IPC loses communication with SCM at any time, DTC U1166 is stored in IPC. Test drive vehicle to aid in diagnosing an intermittent condition. Check for open in serial data line between only IPC and SCM. Also check IPC and SCM for intermittent operation due to a loss of power or ground.
scientia non olet · About LEMON Manuals