Right Turn Indicator Inoperative
- Activate right turn signal switch. If right turn signal light operates properly, go to next step. If right turn signal light does not operate properly, locate and repair problem in exterior lighting system. See WIRING DIAGRAMS .
- Disconnect instrument cluster connector. Connect test light between instrument cluster connector terminal A16 (Dark Blue wire) and ground. If test light pulses on and off, go to step 4). If test light does not pulse on and off, go to next step.
- Repair open or high resistance in circuit No. 15 (Dark Blue wire) between instrument cluster, instrument panel electrical center and turn signal switch. Recheck system operation.
- Replace IPC. See INSTRUMENT PANEL CLUSTER under REMOVAL & INSTALLATION. Recheck system operation.