Left Turn Indicator Inoperative
- Activate left turn signal switch. If left turn signal light operates properly, go to next step. If left turn signal light does not operate properly, locate and repair problem in exterior lighting system. See WIRING DIAGRAMS .
- Disconnect instrument cluster connector. Connect test light between instrument cluster connector terminal A15 (Light Blue wire) and ground. If test light pulses on and off, go to step 4). If test light does not pulse on and off, go to next step.
- Repair open or high resistance in circuit No. 14 (Light Blue wire) between instrument cluster, instrument panel electrical center and turn signal switch. Recheck system operation.
- Replace IPC. See INSTRUMENT PANEL CLUSTER under REMOVAL & INSTALLATION. Recheck system operation.