LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1998 >> Corvette 2D Convertible, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Symptom Testing >> High Beam Indicator Inoperative

High Beam Indicator Inoperative

  1. Turn high beams on. If high beams illuminate, go to next step. If high beams do not illuminate, locate and repair problem in headlight system. See WIRING DIAGRAMS  .
  2. Disconnect instrument cluster connector. Using DVOM, check voltage between instrument cluster connector terminal A2 (Light Green wire) and ground. If reading is 10-14 volts, go to step 4). If reading is not 10-14 volts, go to next step.
  3. Repair open or high resistance in circuit No. 11 (Light Green wire). See WIRING DIAGRAMS  . Recheck system operation.
  4. Replace IPC. See INSTRUMENT PANEL CLUSTER  under REMOVAL & INSTALLATION. Recheck system operation.
scientia non olet · About LEMON Manuals