LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1998 >> Camaro V8-5.7L VIN G >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Actuators and Solenoids - M/T >> Gear Lockout Solenoid >> Service and Repair >> Gear Select/Skip Shift Solenoid Replacement

Gear Select/Skip Shift Solenoid Replacement

REMOVAL PROCEDURE





1. Remove the transmission.
2. Remove the skip shift solenoid from the transmission.

INSTALLATION PROCEDURE





1. Install the skip shift solenoid to the transmission.
^ Tighten the skip shift solenoid to 40 Nm (30 ft. lbs.).

NOTICE: Refer to Fastener Notice in Service Precautions.

2. Install the transmission.

scientia non olet · About LEMON Manuals