Brakes - Corrected Torque Spec. for Caliper Bracket
File In Section: 5 - BrakesBulletin No.: 73-50-31
Date: November, 1997
SERVICE MANUAL UPDATE
Subject:
Section 5 - Revised Torque Specification for Brake Caliper Bracket Replacement (Front and Rear)
Models:
1998 Chevrolet Camaro
1998 Pontiac Firebird
This bulletin is being issued to revise the torque specification for the brake caliper bracket replacement (front and rear) procedure in Section 5 (Disc Brakes) of the Service Manual.
The published torque specification of 225 N.m (166 lb ft) for the brake caliper mounting bracket bolts is incorrect. Please make the following revision:
Torque bolts to 100 N.m (74 lb ft).