Coupe

1. Remove the quarter inner rear trim finish panel. Refer to Body Rear End in Body and Accessories.
2. Remove the rear seat cushion. Refer to Seats in Body and Accessories.
3. Remove the nut (1) that attaches the rear seat retractor-side shoulder belt to the inner wheelhouse panel (2).
4. Remove the bolts/screws (7) that attach the rear seat shoulder belt guide (6) to the rear seat back cushion.
5. Remove the bolt/screw (4) and the spacer (3) that attaches the belt (5) to the floor panel.
6. Remove the belt (5) from the vehicle.