Removal

1. Disable the SIR system. Refer to Disabling the SIR System.
2. Remove the instrument panel carrier. Refer to Instrument Panel Carrier in Instrument Panel, Gauges and Console.

Description:

3. Disconnect the inflatable restraint IP module yellow 2-way pigtail connector from the SIR wiring harness jumper.

Description:

4. Remove the inflatable restraint IP module bracket mounting fasteners (lower).
5. Remove the inflatable restraint IP module bracket mounting fasteners (upper).
6. Remove the inflatable restraint IP module bracket assembly from the IP carrier.

Description:

7. Remove the inflatable restraint IP module mounting fasteners (3).
8. Remove the inflatable restraint IP module (1) from the bracket (2).