Auxiliary Power Outlet: Service and Repair

REMOVAL PROCEDURE




1. Remove the console trim plate.
2. Disconnect the electrical connector from the accessory power receptacle.




3. Unscrew the accessory power receptacle retainer (3).
4. Remove the accessory power receptacle (2) from the console.
5. Remove the accessory power receptacle opening plug (1) from the receptacle (2), if necessary.

INSTALLATION PROCEDURE




1. Install the accessory power receptacle opening pug (1) to the receptacle (2), if removed.
2. Install the accessory power receptacle (2) to the console.
3. Screw the accessory power receptacle retainer (3) to the receptacle (2).
4. Connect the electrical connector to the power receptacle (2).




5. Install the console trim plate.