Domestic Low Beam

Check the following for the low beam headlamps.
1. With the low beams on, observe the beam's high intensity zone on the screen.
2. To adjust the headlamp aim perform the following:
^ For the horizontal aim the left edge of the high intensity zone should be on the vertical axis (1), or within +102 mm (+4.0 in) (3), or (4) -102 mm (-4.0 in) of the vertical axis (1).
^ For the vertical aim the top edge of the high intensity zone should be on the horizontal axis (2), or within -63.5 mm (-2.5 in) (5), or +51 mm (+2.0 in) (6) of the horizontal axis (2).

3. If the above specifications are not met adjust the headlamps accordingly.