Ash Tray Lamp: Service and Repair

REMOVAL PROCEDURE
1. Open the ashtray cover.
2. Remove the ashtray.
3. Pull the bulb, the socket and the shield through the opening in the front floor console.
4. Remove the bulb and the socket from the shield.
5. Remove the bulb from the socket.

INSTALLATION PROCEDURE
1. Install the bulb to the socket.
2. Install the shield to the bulb and the socket.
3. Install the bulb, the socket and the shield to the opening which is in the front floor console.
4. Install the ashtray.
5. Close the ashtray cover.