BI-Level Mode Valve

Remove or Disconnect

1. Front floor console.
2. Floor air outlet.
3. Bi-level mode valve linkage bolt/screw from linkage.
4. Bi-level mode valve actuator.
^ Unsnap bi-level mode valve actuator.

Install or Connect

1. Bi-level mode valve actuator.
^ Snap bi-level mode valve actuator into place.
2. Bi-level mode valve linkage bolt to linkage.

Tighten
^ Bi-level mode valve linkage bolt to 2.3 N.m (20 lb. in.).

3. Floor air outlet.
4. Front floor console.