LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1998 >> Camaro V8-5.7L VIN G >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Camshaft, Lifters and Push Rods >> Lifter / Lash Adjuster >> Service and Repair

Lifter / Lash Adjuster: Service and Repair

REMOVAL PROCEDURE

^ Tools Required
- J3049-A Valve Lifter Remover





1. Remove the cylinder head.
2. Remove the valve lifters. Refer to "Valve Lifter Removal" in "Unit Repair of Engine.

INSTALLATION PROCEDURE





1. Install the valve lifters. Refer to "Valve Lifter Installation" in "Unit Repair of Engine.
2. Install the cylinder head.

scientia non olet · About LEMON Manuals