Brake Hose and Pipe Inspection

Notice: Do not allow components to hang from the flexible brake hoses as damage to the hoses may occur. Some brake hoses have protective rings or covers to prevent direct contact of the hose with other chassis parts. Besides causing possible structural damage to the hose, excessive tension could cause the hose rings to move out of their proper locations.

Inspect the brake hoses at least twice a year for the following conditions:
^ Road hazard damage
^ Cracks
^ Chafing of the outer cover
^ Leaks
^ Blisters

Use a light and a mirror for an adequate inspection.
Replace any hoses with any of the above conditions.