FM Stereo

The following actions occur when a factory-equipped audio system with an FM stereo radio receives an FM stereo broadcast:
^ The radio switches to stereo operation.
^ An indicator on the radio illuminates.

Stereo operation means that the radio is separating the stereo broadcast back into the two original channels. The two channels are the LEFT channel and the RIGHT channel. Stereo sound is more realistic than non-stereo sound.

FM is normally static-free, but any of the following factors may limit reception:
^ Terrain
^ Atmospheric conditions
^ Station strength
^ Distance from the transmitter

Buildings or other obstructions may cause the following conditions:
^ Momentary static
^ Flutter
^ Station swapping

If reception is poor, turning to a different station that is stronger will bring improvement.