Cassette Tape Error Indicator

The cassette player may detect an error in the tape just after the tape is loaded or while the tape is playing. When the cassette player detects a condition, the cassette player will attempt to work around the error. The cassette player will eject the tape and switch to the radio mode if the cassette player cannot continue to play the tape.
^ The radio will display the following data if a condition is present.
^ One of the following error messages:
- E10
The tape is tight and the player can not turn the tape hubs.
- E11
The cassette tape is broken. Try a new tape.
If there is not tension on the reels of the tape player, the tape player will interpret the tape as broken and eject the tape.

Each message will appear for 5 seconds.

The error indicator feature may not work with certain types of adapters for add-on compact disc (CD) players.