Exit Lighting and Delayed Illumination

Exit lighting illuminates interior lamps when the key is removed from the ignition switch to help in exiting the vehicle. Delayed illumination illuminates interior lamps for 25 seconds after the doors are closed. The 25 seconds is shortened if the ignition is turned on or if the power locks are activated. Both exit lighting and delayed illumination are enabled from the factory, and can be disabled if desired.
1. Enter the programming mode.
2. Turn the courtesy lamp switch ON then OFF (I/P dimmer switch, not parking lamps).
Listen to the number of chimes to determine current setting.
The factory setting is in CAPITAL print.
3. Turn the courtesy lamp switch ON and OFF to increment desired setting below.
4. Continue customizing other features or exit the programming mode.