Crankshaft, Main & Connecting Rod Bearings (5.0L & 5.7L)
WARNING: This page is about a different variant/trim than selected.
CRANKSHAFT, MAIN & CONNECTING ROD BEARINGS (5.0L & 5.7L)
| Application | In. (mm) | ||
|---|---|---|---|
| Crankshaft End Play | .002-.008 (.05-.2) | ||
| Main Bearings | |||
| Journal Diameter | |||
| No. 1 | 2.4484-2.4493 (62.189-62.212) | ||
| No. 2, 3 & 4 | 2.4481-2.4491 (62.181-62.207) | ||
| No. 5 | 2.4479-2.4491 (62.177-62.207) | ||
| Journal Out-Of-Round (Maximum) | |||
| Standard | .0002 (.005) | ||
| Service Limit | .001 (.03) | ||
| Journal Taper (Maximum) | .0002 (.005) | ||
| Oil Clearance | |||
| No. 1 | .0007-.0021 (.018-.053) | ||
| No. 2, 3 & 4 | .0009-.0024 (.023-.061) | ||
| No. 5 | .001-.002 (.025-.051) | ||
| Connecting Rod Bearings | |||
| Journal Diameter | 2.0978-2.0998 (53.284-53.334) | ||
| Journal Out-Of-Round | .0003 (.008) | ||
| Service Limit | .001 (.03) | ||
| Journal Taper | .0003 (.008) | ||
| Service Limit | .001 (.03) | ||
| Oil Clearance | .0013-.0035 (.033-.089) | ||
| Side Clearance | .006-.024(.150-.61) | ||