LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1997 >> Camaro V6-3.8L VIN K >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Service and Repair >> Unit Repair >> Unit Subassembly Repair and Inspection >> K. Drive Gear Bearing Retainer Oil Seal

K. Drive Gear Bearing Retainer Oil Seal






REMOVE OR DISCONNECT
- Oil seal, using a screwdriver or a small chisel.

INSTALL OR CONNECT
- New seal into retainer using J 37375 until it bottoms in bore.
- Lubricate inside diameter of seal with transmission lubricant.