Reservoir Assembly

REMOVE OR DISCONNECT
1. Pump assembly from vehicle, if necessary for access.
2. Retaining clips (3) and (5) from reservoir assembly (2) and housing (10).
3. Reservoir (2) from housing ( 10).
4. O-ring seal (8) from reservoir (2).

INSTALL OR CONNECT
1. Lubricate new O-ring (8) with power steering fluid.
^ O-ring seal (8) to reservoir (2).
2. Reservoir assembly (2) to housing (10).
3. Retaining clips (3) and (S) to reservoir (2) and housing (10).
4. Pump assembly to vehicle, if removed.