Power Steering Fluid Reservoir

REMOVE OR DISCONNECT
1. Place drain pan under reservoir (10).
2. Cap (24) from reservoir (10).
3. Reservoir (10) from bracket (16).
5. Outlet hose and reservoir hose from reservoir. Refer to "Power Steering Gear Inlet and Outlet Hoses" and "Power Steering Fluid Reservoir Hose".
6. Reservoir (10).

INSTALL OR CONNECT

NOTICE: Do not start the vehicle with any power steering gear inlet or outlet hoses disconnected. When disconnected, cap or plug all openings of components. Failure to do so could result in contamination or loss of power steering fluid and damage to the system.

1. Outlet hose and reservoir hose to reservoir. Refer to "Power Steering Gear Inlet and Outlet Hoses and "Power Steering Fluid Reservoir Hose".
2. Reservoir (10) to bracket (16).
3. Cap (24) to reservoir (10).
4. Refill and bleed power steering system. Refer to "Bleeding Air from the Power Steering System".