Hazard Warning Flasher: Description and Operation

The hazard warning flashers are part of the turn signal circuit. The hazard warning switch is on the right side of the steering column. Pressing in on the hazard warning switch button causes the front and rear turn signal lamps and front sidemarker lamps to flash. Pulling on the hazard warning switch knob will turn off the hazard warning flashers.

The hazard warning flashers will work with the ignition switch in any position. When the hazard warning flashers are 'ON," the turn signals do not work. The hazard lamp flasher is attached to a clip that is attached to the bracket that the 48-way connector is attached to.