Turn Signal Indicator Lamps

The left or right turn signal indicator lamp will illuminate when the multifunction lever on the left side of the steering column is moved to signal a turn. The turn/hazard switch in the steering column receives an on-and-off flashing current from the fuse block and the turn signal flasher unit in the convenience center when the ignition switch is in the "RUN," "START" or "BULB TEST" position. The turn/hazard switch routes the current to circuits that feed the left or right front turn signal lamp, left or right rear tail/stop/turn signal lamps when the multifunction lever is moved. The circuit to the left or right front turn signal lamp, and cornering and sidemarker lamps has a branch that feeds the appropriate turn indicator lamp in the instrument cluster, causing it to flash when the exterior lamps are indicating a turn.

When the hazard warning button on the right side of the steering column is pressed in, the left and right front turn signal lamps, cornering and sidemarker lamps, and rear tail/stop/turn signal lamps, all flash, and both turn signal indicator lamps in the Instrument cluster flash. Power for the hazard warning system reaches the turn/hazard switch from the fuse block and the hazard flasher in the convenience center. Power is supplied with the ignition switch in any position. When the hazard warning system is flashing, the turn signal circuits are inoperative.