BI-Level Mode Valve

Remove or Disconnect

1. Front floor console.
2. Floor air outlet.
3. Bi-level mode valve linkage bolt/screw from linkage.
4. Bi-level mode valve actuator (10).
^ Unsnap hi-level mode valve actuator (10).

Install or Connect

1. Bi-level mode valve actuator (10).
^ Snap bi-level mode valve actuator (10) into place.
2. Bi-level mode valve linkage bolt/screw to linkage.

Tighten

^ Bi-level 1 mode valve linkage bolt/screw to 2.3 N.m (20 lb. in.).

3. Floor air outlet.
4. Front floor console.

Remove or Disconnect

1. Instrument panel.
2. Vent mode valve linkage bolt/screw.
3. Vent mode valve actuator (19).
^ Disconnect linkage from vent mode valve actuator (19).

Install or Connect

1. Vent mode valve actuator (19).
^ Connect linkage to vent mode valve actuator (19).
2. Vent mode valve linkage bolt/screw.

Tighten

^ Vent mode valve linkage bolt/screw to 2.3 N.m (20 lb. in.).
3. Instrument panel.