Without RPO Y87

W/O RPO Y87:

REMOVAL
1. Raise and suitably support vehicle.
2. Support exhaust muffler (15).
3. Exhaust pipe hanger nut (19).
4. Exhaust muffler hanger bracket bolts/screws (42).
5. Exhaust muffler hanger (16).

INSTALLATION
1. Exhaust muffler hanger (i6) to underbody.
2. Exhaust muffler hanger bracket bolts/screws (42). Tighten exhaust muffler hanger bracket bolts/screws (42) to 9.5 Nm (84 inch lbs.).
3. Exhaust pipe hanger nut (19). Tighten exhaust pipe hanger nut (19) to 20 Nm (15 ft. lbs.).
4. Remove support from exhaust muffler (15).
5. Lower vehicle.