Instrument Panel Compartment Door Lock Cylinder

Remove or Disconnect
1. Door lock.
2. Insert key in lock cylinder (101) and rotate to locked position.
3. Remove key from lock cylinder (101).
4. Depress silver key tumbler using small bladed screwdriver.
5. Reinsert key into lock cylinder (101) while depressing key tumbler.
6. Rotate the cylinder clockwise and remove lock cylinder (101) and key.

Install or Connect
1. Depress silver key tumbler and insert key into the lock cylinder (101).
2. Lock cylinder (101) and key into the lock.
IMPORTANT
^ The lock handle must he opened to allow for installation.
3. Relock the lock (rotor) and rotate the key to the unlock position.
4. Remove key from the lock cylinder (101).
5. Door lock.