Diagnostic Aids
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1997 GMC Yukon, 1997 GMC Suburban, 1997 GMC Pickup, 1997 GMC Cab & Chassis, and 1997 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
Check for poor connections at VCM. Inspect KS module connector for backed out terminals, broken locks, and improperly formed or damaged terminals. Check for damaged or improperly installed KS module. Check for bent pins, deformed terminals, or if KS module is fully seated. Check knock sensor torque specification. Specification should be 14 ft. lbs. (19 N.m). Checking FAIL RECORDS vehicle mileage data since diagnostic test last failed can be useful in determining how often condition causing DTC to set occurs. This may assist in diagnosis.