Circuit Description
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1997 GMC Yukon, 1997 GMC Suburban, 1997 GMC Pickup, 1997 GMC Cab & Chassis, and 1997 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
Manifold Absolute Pressure (MAP) sensor responds to changes in intake manifold pressure (vacuum). A 5-volt reference is applied to sensor. A variable resistor moves in relation to manifold pressure and a voltage signal is returned to VCM through MAP signal circuit. Voltage signal varies from 1-1.5 volts at closed throttle (high vacuum) to 4-4.5 volts at wide open throttle (low vacuum). A change in throttle position and engine speed should precede change in MAP. If change does not occur, MAP malfunction is present. VCM utilizes MAP signal and throttle position to determine fuel delivery.